The latest generation of the Gema powder booth has ten individually movable guns, including chemical pretreatment and baking and a robot system for pre-powdering. Maximum size of the parts: 3.2m x 0.8m x 1.6m Capacity: Up to 96 m2 per hour
The high-tech coater
#1
High-tech coater
50
employees
1949
Foundation
150
MWh/year of solar power produced
-
Powder coating on the continuous line -
Fully automatic powder coatingThe robot system is designed for the fully automatic pretreatment, masking, powder coating and curing smaller parts in medium to large series. For aluminium, magnesium and its alloys.
-
Robot-assisted wet & special coating (PTFE)4 robot systems; 2 manual cabins; Monorail; Clean room & Grinding cabin / Maximum size of parts: 3.5m x 1m x 1.6m, 300kg & Capacity: Up to 440 parts per hour
-
Robot-assisted powder coating3 Robot carousel systems & 2 Hand cabins / For: Complex individual parts, high flexibility and special coatings / Maximum size of parts: 3.5m x 1m x 1.6m, 300 kg & Capacity: Up to 400 parts per hour
-
Special paints & functional coatingsHigh-quality PTFE (Polytetrafluoroethylene) and similar (PTFA-, PTFO-) coatings are used for all materials and in many areas of industry, including the food sector and laboratory and medical technology.
-
Control & examinationOptical inspection; Initial sample inspection; Layer thickness measurements & Final inspection / All tests are documented in test plans and measurement protocols.
-
Upstream and downstream processesCleaning; Chemical pre-treatment; Sandblasting; Printing of parts; Assembly & special solutions for packaging, storage and transportation
Brönnimann Industrielackierwerke AG
The Brönnimann Industrielackierwerke AG specialises in powder coatings, wet and special paintwork of aluminium, steel and plastic parts up to 3000mm in length and all upstream and downstream processes. Whether you want to coat large or small workpieces, single, few or many; simple or complex shapes, single or double layer; according to specific quality standards, wear-resistant or not – discuss these and other requirements with us.
1949
Founding of the bicycle repair shop with paint shop
1974
Founding of the joint-stock company and move to Derendingen
2001
Construction of a warehouse and commissioning of the continuous line
2006
Switching to chrome-free pre-treatment with closed water circuit.
2007
Heinz Brönnimann, 2nd generation hands over within the framework of an MBO
2010
Purchase of Nenniger+Steiner
2011
Certification according to ISO14001 and OHSAS 18001(ISO 45001) Cooperation agreement with the AfU and construction of a clean room
2012
First robotics system for the continuous process, including
pre-treatment and furnace for powder coating
2013
Purchase by Fritschi Beteiligungen AG, Wangen b.O.
2017
Main coating processes with now nine robot systems IT supported management system, error management, employee knowledge management and measure tracking Transformation from trade to industrial operation
2022
Inclusion of the Brönnimann Industrielackierwerke AG
in the SwissFactory.Group
2023
Further investments in automation and robotization
